E3D V6 Mount

Started 4th June 2017

Still improving my cheap ebay, clone, CTC Prusa I3, 5 mm plywood printer I moved to using E3D hot ends. This required a new way of attaching the combination of hot end and extruder to the printer. I ended up designing a bracket that attaches to the X axis, bolted to this are a couple of blocks that hold the E3D v6 (as well as the extruder). Finally a part cooling fan was added by slightly changing an existing design [1]. See also E3D V6 Bowden.

Downloads:

Links:

  1. Tank3D E3D V6 Fan 3010 LayerFan with adjustment

Comments

Click to return to index

Page last modified on July 03, 2017, at 12:14 AM
Powered by PmWiki