SAVE00:To save, drag the icon to a directory viewer.
DEV0:Hearsay using device
DEV1:Hearsay using device: are you sure you want to Quit?
ACTIVE:Cannot activate:
MODEM:Modem is not responding. Is it switched on?
WIMP00:<Wimp$Scrap> not defined
UXDS:Unexpected DataSave packet
UXRM:Unexpected RAM Fetch packet
PR00:No printer driver.
PR01:Cannot open print file.
PR02:Continue
PR03:Pause
PR04:No printer driver.
PR05:Cannot open printfile.
MEMERR:Hearsay has run out of memory.
SCR00:Script stopped
SCR01:Divide by zero
SCR02:Too many files open
SCR03:Insufficient memory in
SCR04:Needed
SCR05:got
SCR06:Unmatched }
SCR07:Wrong token
SCR08:Wrong type
SCR09:Must be lvalue
SCR10:Must be type
SCR11:Bad argument type
SCR12:Wrong number of arguments
SCR13:Unknown identifier
SCR14:Multiple definition
SCR15:Need a constant here
SCR16:Expected a statement
SCR17:Must be in a loop to 'break'
SCR18:Must be in a loop to 'continue'
SCR19:Need an expression
SCR20:Must be in a 'switch'
SCR21:Can only have one 'default'
SCR22:Wrong type for 'return' value
SCR23:Too many arguments
SCR24:Insufficient memory
SCR25:Error
SCR26:at line
SCR27:in
SCR28:Script stopped
SDEV00:Can't find serial devices!
SDEV01:Driver not found!
SDEV02:Not enough room for driver block, increase WimpSlot in !Run
CONF00:Viewdata
CONF01:buffer
CONF02:buffers
CONF03:changed but not saved in Hearsay: are you sure you want to Quit?
STAT00:Print
STAT01:Spool
STAT02:Xon/Xoff
STAT03: Online
STAT04:Offline
VDATA:Viewdata
MINITEL:Minitel
TERM00:Viewdata
TERM01:Minitel
TERM02:ANSI
TERM03:VT320
TERM04:VT102
TERM05:VT52
TERM06:Tek 4105
TERM07:Teletype
TERM08:Campus
CET00:Transfer complete
CET01:Too many retries
CET02:Can't find header
CET03:Lost block synch
CET04:Cancelled
CET05:Filing system error
CET06:Need Viewdata terminal
CET07:Transfer complete
ALIAS:alias
ARM:arm
RXPATH:RXPATH
BYTES:Bytes
BLOCK:Block
ZM00:Skipped
ZM01:Cancelled
ZM02:OK
ZM03:Offline
ZM04:Error
ZM05:Starting transfer
ZM06:Receiving binary file
ZM07:Receiving ASCII file
ZM08:Too many retries
ZM09:Transfer complete
ZM10:Sender cancelled
ZM11:Timeout
ZM12:Bad data subpacket
ZM13:Data subpacket too long
ZM14:Transfer cancelled
ZM15:Garbage count exceeded
ZM16:Carrier lost
ZM17:Bad CRC
RATE:Rate
TDIR00:Not enough memory for Tele-dir.
TDIR01:An entry with this name already exists. Are you sure?
TDIR02:Deleting entries:
TDIR03:Deleting entry:
TDIR04:Are you sure?
TDIR05:Phone directory entry not found!
TDIR06:Edit '%s'
TDIR07:Del. selection
TDIR08:Del. '%s'
TDIR09:Dial '%s'
TDIR10:Dial
TDIR11:Driver
TDIR12:User
VXBF00:Buffer
VXBF01:No number on this frame
VXBF02:Cannot open another buffer.
VXBF03:Cannot open file.
VXBF04:Bad buffer name.
VXBF05:Do you want to save modified buffer?
VXBF06:1 Viewdata buffer changed but not saved: are you sure you want to delete it?
VXBF07:%d Viewdata buffers changed but not saved: are you sure you want to delete them?
FILE00:RawData
FILE01:TextFile
FILE02:Sprite
FILE03:Draw
FILE04:FrameFile
FILE05:SpoolFile
FILE06:TextFile
FILE07:Config
FILE08:Macros
FILE09:Record
FILE10:Error writing file:
VXED00:Text editor
VXED01:Copy blocks
VXED02:Move blocks
VXED03:Delete blocks
VXED04:Save block
VXED05:Paste block
VXED06:Pixel editor
VXED07:Clear screen
VXED08:Clear screen. Are you sure?
VXED09:T
VXED10:G
VXED11:Fla
VXED12:Std
VXED13:Sgl
VXED14:Dbl
VXED15:Cnc
VXED16:Con
VXED17:Sep
VXED18:Bbk
VXED19:Nbk
VXED20:Hld
VXED21:Rel
VX0:Replace(%d)
VX1:Insert(%d)
XM00:Filing system error
XM01:Transfer timed out
XM02:Transfer cancelled remotely
XM03:Cancelled too many retries
XM04:Cancelled synchronization lost
XM05:Transfer cancelled
XM06:Offline!
XM07:Error in -g mode
XM08:Transfer complete
XM09:  Waiting...
XM10:Sending block #
XMACK:ACK block
XMNAK:NAK block
XM11:CRC
XM12:Check
XM13:NAK EOT
XM14:ACK EOT
XM15:Waiting for initiation
XM16:ACK received
XM17:NAK received
XM18:CRC-G
XM19:Bad block number
XM20:Bad block
XM21:Good block
XM22:Duplicate block
VIEW00:Can't open viewer
ASC00:XOFF received
ASC01:XOFF cancelled
ASC02:Waiting for prompt
ASC03:Waiting for start char
ASC04:Cancelled
ASC05:File Error
ASC06:Transfer complete
ASC07:Waiting for begin char
ASCCR:CR
ASCLF:LF
ASCCRLF:CRLF
ASCLFCR:LFCR
ASCRAW:Raw
VT00:Teletype
VT01:VT52
VT02:VT102
VT03:ANSI
VT04:VT320
VT05:Error on Spool file
REP00:Pause
REP01:Continue
LOG00:Offline from %s after %d used %d units
LOG01:Offline from %s after %d
LOG02:Online to %s
V00:ASCII
V01:British
V02:Dutch
V03:Finnish
V04:French
V05:French/Canadian
V06:German
V07:Italian
V08:Norwegian/Danish
V09:Portuguese
V10:Spanish
V11:Swedish
V12:Swiss
V13:Latin-1
V14:Spec. Graphics
V15:Supp. Graphics
V16:Technical
V17:Alt ROM
V18:Alt Graphics
V19:DRCS
V20:None
V21:Line
V22:Block
V23:None
V24:Local
V25:Host
V26:Tabs
PN0:Text
PN1:Epson
PN2:IBM
PN3:Driver
PN4:CR
PN5:LF
PN6:CRLF
PN7:LFCR
PN8:Raw
VW0:File ''
VW1:File '%s'
VW2:Selection
CN0:Discard
CN1:Save
FTP0:Undefined
FTP1:Sent
FTP2:Short
FTP3:Ready
FTP4:Open
FTP5:Recvd
FTP6:send
FTP7:receive
FTP8:get
FTP9:server
FTS0:Xmodem
FTS1:Xmdm 1K
FTS2:Ymodem
FTS3:Zmodem
FTS4:Kermit
FTS5:SEAlink
FTS6:ASCII
FTS7:CET
FTS8:None
FTL0:Xmodem
FTL1:Xmodem 1K
FTL2:Ymodem
FTL3:Zmodem
FTL4:Kermit
FTL5:SEAlink
FTL6:ASCII
FTL7:CET
FTL8:None
KM0:Transfer complete
KM1:Discarded
KM2:Interrupted
KM3:Skipping
KM4:Error
KM5:1 6Chk
KM6:2 12Chk
KM7:3 16CRC
KM8:Kermit created
KM9:Directory is:
KMH:Hearsay Kermit Server REMOTE Commands:\n\nGET files  REMOTE CWD [dir]    REMOTE DIRECTORY [files]\nSEND files REMOTE SPACE [dir]  REMOTE HOST command\n           REMOTE DELETE files REMOTE TYPE files\nBYE        FINISH              REMOTE HELP\n\n\0
KMS:\r\nHearsay Kermit server starting. Return to your local machine by typing\r\nits escape sequence for closing the connection, and issue further\r\ncommands from there. To shut down the Hearsay Kermit server, issue the\r\nBYE command to terminate Hearsay, or the FINISH command and then reconnect.\r\n\r\n\0
KP0:Receive window full.
KP1:User cancelled.
KP2:Too many retries.
KP3:Sent too many NAKs.
KP4:internal error number 21
KP5:S/W Protocol Error.
KP6:Timed out.
KP7:Internal error number 18
KP8:Can't allocate receive buffer
KP9:NAK out of window
KW0:User cancelled transaction
KW1:Badly formed server command
KW2:Can't do system command
KW3:Unimplemented server function
KW4:Can't change directory
KW5:Can't list directory
KW6:Can't remove file
KW7:Can't send help
KW8:REMOTE SET disabled
KW9:Unknown REMOTE SET parameter
KW10:Can't type file
KW11:Can't check space
KW12:REMOTE WHO disabled
KW13:Can't do who command
KW14:Unimplemented REMOTE command
KW15:Can't transform filename
KW16:Error writing data
KW17:Can't open file
KW18:Error writing data
KW19:Can't close file
KW20:Can't send attributes
KW21:Can't open file
KW22:Unexpected packet type
KW23:Hearsay Kermit server finished.
KW24:Can't execute command
KW25:Can't open file
KW26:resend error number 13.
KW27:resend error number 12.
KW28:Too many retries.
KW29:resend error number 19.
KW30:resend error number 52.
KS0:Can't open file
KS1:closing file.
KS2:Too many files
KS3:File not found
KS4:No readable file to send
KN0:6 bit sum
KN1:12 bit sum
KN2:16 bit CRC
CON0:Dialling
CON1:Connect
CON2:Direct connection
CON3:Disconnect
CON4:Talk to modem
CON5:Reconnect
CON6:Short break
CON7:Long break
CON8:Auto answer
TK0:render failed: os error
TK1:verify failed: code %d at %d
TK2:render failed: code %d at %d
TK3:Tek Text
ST0:None
ST1:RTS/CTS
ST2:Xon/Xoff
ST3:None
ST4:Even
ST5:Odd
ST6:Mark
ST7:Space
